Forum: How-to's

*Thanks RailHomie and Ahriman for your contributions. Supplies: Obviously, a new intercooler pump. The pump is produced by Bosch and was used...

There are a few different ways of doing this, I chose this route because it seems like the easiest. So firstly I marked how I wanted the pipes to...

Figured I'd contribute my how-to to this site :punk: TOOLS NEEDED 10MM RATCHET WRENCH 13MM DEEP SOCKET 14MM DEEP SOCKET & BOX END WRENCH 15MM...

First step is to buy some good strong replacement roll pins. They are hard to find, try Fastenal. I will post specs later. Second is, if you ever...

What you will need for installation: -WOT box -coat hanger -side cuts -wire strippers -electrical tape -soldering gun and solder -extra zip...

I will do my best to explain, but I do not have pictures of EVERYTHING. I will try to explain the step-by-step with some added pictures along the...

Here is how to set-up your Wideband so that you can read it with your HPTuners Standard Cable (Pics will come later). It is not advisable to use your...

1. Remove excessive packing materials... 2. Oggle at the majesty...

(sorry about picture quality)(2008 Cobalt, all others similar) The parts youll need, the 2.4 manifold, crankcase passage seal(seal with metal...

this how to isnt for everyone but in all honesty i think this is the only correct way to black out tail lights in stead of using that garbage vht...

Covering your Interior pillars With Fabric. Materials needed- 2-3 yards of material(I messed up twice, so the extra fabric helped) 3M...

Here is a list of instructions for installing a Dual-pass Intercooler Endplate. It is highly recommended that you read all instructions before...

With the new vbulletin update to version 4.0 uploading files to the site is much easier than ever. just one thing...where is my albums? select...

Tools Needed Rachet Wrench 15mm Socket Universal Joint 3" extension 10mm socket Tiny Hands with Long Fingers! :lol: [/URL] First...

well Maven asked me to join over here from cobaltss.net and post my instructions on how to install the Over The Top Performance stage2 trans mounts....

So, UPS shows up to your door with a big brown box. You get a fuzzy feeling and proceed to open the box up like it's Christmas morning and you don't...

A set of metric gear wrenches makes this job a snap, but any small metric tool kit should do. 1.) Remove the low pressure fuel pump relay, and...

Taken from another forum. Please feel free to add your own experiences. How to change the LSJ Fuel Filter Parts Needed: - New Fuel Filter...

So Been on here for a lil while and noticed this wasn't on here but it is indeed possible to install the 2.4 Intake manifold on a cable driven tb...

ok. so i color matched my interior trim to our black paint code. ebony 167a. this is the way to do it like this. if you want you could take your...