J Alignment Specs

[Maven]

Front Caster Angle Alignment Specifications 4.3 deg
Tolerance +/- 1.00 deg
Front Camber Angle Alignment Specifications -0.20 deg
Tolerance +/- .75 deg
Individual Toe Angle Alignment Specifications 0.00 deg
Tolerance +/- 0.10 deg
Note: Measure the above toe angles with the steering wheel at level position, visually aligned with the column.
Sum Toe Angle Alignment Specifications 0.00 deg
Tolerance +/- 0.30 deg
Cross Camber Angle Alignment Specifications 0.00 deg
Tolerance +/-0.75 deg
Note: Slight cross camber specification differences can be made when servicing the vehicle for steering pull.
Cross Caster Angle Alignment Specifications 0.00 deg
Tolerance +/-1.00 deg
Rear Camber Angle Alignment Specifications -0.40 deg
Tolerance +/- 0.75 deg
Rear Sum Toe Angle Alignment Specifications 0.20 deg
Tolerance +/- 0.30 deg
Rear Thrust Angle Alignment Specifications 0.00 deg
Tolerance +/- 0.25 deg

[TheSundownFire]

Picture link isnt working for me.

[Jazer]

Picture link isnt working for me.

Me neither

[The_cobalt_kid]

me either..... but i is on US GOV interwebs....

[qwikredline]

me either. maven has gone covert

[The_cobalt_kid]

[Maven]

There you go, back up. Specs acceptable for all 95-05 J bodies.

[qwikredline]

thanks if i get the 05 winter beater cavvy this will be perfect

[Jn2]

thanks if i get the 05 winter beater cavvy this will be perfect

i have my Gf driving mine make good DD'ers