+ Reply to Thread
Results 1 to 18 of 18

Thread: Tial Q?

  1. #1
    Apprentice INFE is an unknown quantity at this point INFE is an unknown quantity at this point INFE's Avatar
    Join Date
    Nov 2010
    Location
    LI, New York
    Posts
    173

    Default Tial Q?

    What spring are you guys running on turbo LSJs? Getting rid of my hks for hopefully better flow.
    Lsj + Cams + PTE6262= Stock motor till she blows!

    It's Never Fast Enough

  2. #2
    GMSC Vendor

    Omiotek is an unknown quantity at this point Omiotek is an unknown quantity at this point Omiotek's Avatar
    Join Date
    Feb 2010
    Location
    Carol Stream, IL
    Posts
    15,559

    Default

    depends on your vacumm at idle. go on their website it will tell u what spring you need for the correct vacumm
    Performance Autowerks
    Powell Raceshop
    GMSC
    94 25.5 Z28 with a baby turbo
    2009 Cobalt SS/TC
    2001 Subaru Impreza RS

  3. #3
    Post Master General
    BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS's Avatar
    Join Date
    Feb 2010
    Location
    Miami, FL
    Posts
    10,812

    Default

    i run the unpainted -10psi spring for -16 to -19inHg. although my car does idle at -21inHg it did not like the -11psi pink spring at all

    BULLSEYE POWER FANBOY #001

  4. #4
    GMSC Vendor

    Omiotek is an unknown quantity at this point Omiotek is an unknown quantity at this point Omiotek's Avatar
    Join Date
    Feb 2010
    Location
    Carol Stream, IL
    Posts
    15,559

    Default

    yeah my car did not like that spring either.... bov wouldnt even open. i modified my spring to work.
    Performance Autowerks
    Powell Raceshop
    GMSC
    94 25.5 Z28 with a baby turbo
    2009 Cobalt SS/TC
    2001 Subaru Impreza RS

  5. #5
    Apprentice INFE is an unknown quantity at this point INFE is an unknown quantity at this point INFE's Avatar
    Join Date
    Nov 2010
    Location
    LI, New York
    Posts
    173

    Default

    Quote Originally Posted by BLAZIN07SS View Post
    i run the unpainted -10psi spring for -16 to -19inHg. although my car does idle at -21inHg it did not like the -11psi pink spring at all
    Thanks I'll give the -10 a try. I'm sick of my hks always get turbo flutter.
    Lsj + Cams + PTE6262= Stock motor till she blows!

    It's Never Fast Enough

  6. #6
    GMSC Vendor

    Omiotek is an unknown quantity at this point Omiotek is an unknown quantity at this point Omiotek's Avatar
    Join Date
    Feb 2010
    Location
    Carol Stream, IL
    Posts
    15,559

    Default

    hks is a pos if you ask me. people buy it mainly because of the sound. tials the way to go if you ask me. ive ran them on every single turbo car ive owned and they have YET to fail me.
    Performance Autowerks
    Powell Raceshop
    GMSC
    94 25.5 Z28 with a baby turbo
    2009 Cobalt SS/TC
    2001 Subaru Impreza RS

  7. #7
    Post Master General
    USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP's Avatar
    Join Date
    Feb 2010
    Location
    Texarkana, AR
    Posts
    14,194

    Default

    HKS is what I put on the car when I first turbo swapped. I removed the sound insert though, so it should have blown off quietly. Never found out though... because the SOB never opened once. Swapped to the Tial a few days later.

    I believe I have an unpainted spring in my garage, as well.
    - R 0 B 3 R T 0 - FükenDübben -

  8. #8

    Default

    I run the 9psi spring in my Tial Q. Works great!
    Mods:
    Diamond, Darton, Supertech, Spec, Total Seal, Siemens, NGK, K&N, Vulcan turbo header and Intake manifold, Garrett GT3076R, Tial Q BOV, Tial Wastegate, Hahn Intercooler, E85, HPT.

  9. #9
    SAAAAAAAAAAB!!!!! Jn2 is an unknown quantity at this point Jn2's Avatar
    Join Date
    Feb 2010
    Posts
    1,124

    Default

    for some reason every tial vid i see on youtube, the car will have turbo flutter during low-mid boost shifting...only during WOT full boost shifts does it not have that pr-pr-pr-pr sound....thats part of why i didnt get one...that and a 50mm would be too big for my tiny td04
    http://www.gmsportcompact.net/forums/image.php?type=sigpic&userid=40&dateline=132028029  0

  10. #10
    Post Master General
    USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP's Avatar
    Join Date
    Feb 2010
    Location
    Texarkana, AR
    Posts
    14,194

    Default

    Its not turbo flutter... its the BOV chattering. It'll give 2 or 3 small blow offs.
    - R 0 B 3 R T 0 - FükenDübben -

  11. #11
    Apprentice INFE is an unknown quantity at this point INFE is an unknown quantity at this point INFE's Avatar
    Join Date
    Nov 2010
    Location
    LI, New York
    Posts
    173

    Default

    I'm now wondering If the hks had something to do with my turbo killing itself
    Lsj + Cams + PTE6262= Stock motor till she blows!

    It's Never Fast Enough

  12. #12
    Post Master General
    BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS's Avatar
    Join Date
    Feb 2010
    Location
    Miami, FL
    Posts
    10,812

    Default

    Quote Originally Posted by Jn2 View Post
    for some reason every tial vid i see on youtube, the car will have turbo flutter during low-mid boost shifting...only during WOT full boost shifts does it not have that pr-pr-pr-pr sound....thats part of why i didnt get one...that and a 50mm would be too big for my tiny td04


    about 25-30% throttle. no more than 7psi of boost

    BULLSEYE POWER FANBOY #001

  13. #13
    Post Master General
    BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS's Avatar
    Join Date
    Feb 2010
    Location
    Miami, FL
    Posts
    10,812

    Default

    Quote Originally Posted by USMCFieldMP View Post
    Its not turbo flutter... its the BOV chattering. It'll give 2 or 3 small blow offs.
    mine doesn't chatter at all. my old tial 50mm bv did on my civic but the q doesn't on the balt

    BULLSEYE POWER FANBOY #001

  14. #14
    GMSC Vendor

    Omiotek is an unknown quantity at this point Omiotek is an unknown quantity at this point Omiotek's Avatar
    Join Date
    Feb 2010
    Location
    Carol Stream, IL
    Posts
    15,559

    Default

    yeah the old 50mm did but the tial Q is the new and improved version. i have absolutely no chatter.
    Performance Autowerks
    Powell Raceshop
    GMSC
    94 25.5 Z28 with a baby turbo
    2009 Cobalt SS/TC
    2001 Subaru Impreza RS

  15. #15
    Post Master General
    USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP's Avatar
    Join Date
    Feb 2010
    Location
    Texarkana, AR
    Posts
    14,194

    Default

    To make a correction... if you DO have compressor surge/chatter with a Tial... its because you have the wrong spring in it. Simple and cheap to change though.

    Quote Originally Posted by INFE View Post
    I'm now wondering If the hks had something to do with my turbo killing itself
    Probably.

    Quote Originally Posted by BLAZIN07SS View Post
    mine doesn't chatter at all. my old tial 50mm bv did on my civic but the q doesn't on the balt
    Because the Q is of better design... that's why they rearranged the springs and assigned them new pressures.

    Quote Originally Posted by Omiotek View Post
    yeah the old 50mm did but the tial Q is the new and improved version. i have absolutely no chatter.
    Indeed.
    - R 0 B 3 R T 0 - FükenDübben -

  16. #16
    Whoo Whoo!!!

    Deathscythe is a name known to all Deathscythe is a name known to all Deathscythe is a name known to all Deathscythe is a name known to all Deathscythe is a name known to all Deathscythe is a name known to all Deathscythe is a name known to all Deathscythe is a name known to all Deathscythe's Avatar
    Join Date
    Jun 2010
    Location
    Virginia. Secret stough...
    Posts
    14,487

    Default

    I have the unpainted spring in mine

  17. #17
    LIFER Vink70 is an unknown quantity at this point
    Join Date
    Jan 2011
    Location
    Dixon, IL
    Posts
    761

    Default

    I like my original tial over the tial q. Sounds like im one of the few. I just think it sounds a lot better. I tried my friends tial q and didnt like it at all. The hks sounds like a terrible sword fight.

  18. #18
    Veteran Brags is an unknown quantity at this point
    Join Date
    Jul 2010
    Location
    Chicago, IL
    Posts
    1,791

    Default

    I ran the tial q for a little while, worked, sounded great. NO flutter. Now run a tial QR recirculated, silent and awesome lol

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts