Tint films

[nodrama]

I'll keep this short and to the point.
Completed first tint ever, made a couple mistakes and now I'm ready re-do the tints for a more professional look...

My question is: what tint film makers have the Superior films?

Also any wisdom, tips, or tricks on tinting would be much appreciated

[NASKRON]

bump

[Maven]

3M Professional, Llumar or Johnson. I like Johnson Its whats on both my Balt and the wifes car.

[Maven]

Pretty sure Ive got Johnson Trident on the doors and Johnson Marathon on the back 3, and all the way around on the wifes.

[YelloEye]

3M Professional, Llumar or Johnson. I like Johnson Its whats on both my Balt and the wifes car.

Spread the word gents.

[NASKRON]

what is the fix for the dot matrix part of are windows, cause mine look like shet

[nodrama]

what is the fix for the dot matrix part of are windows, cause mine look like shet

I used some really fine steel wool to sand them, then just scrub the hell out of that area with soap-water to make sure no residue is left over...

[NASKRON]

I used some really fine steel wool to sand them, then just scrub the hell out of that area with soap-water to make sure no residue is left over...

all it is is paint right

[ALL4GLH]

I'm assuming you put it on using the soap/water with squeegee method (never can tell who tries to line it up first without it)? Some tinters leave the dot matrix alone, not sure what the others done. I haven't had too many issues with mine.

[nodrama]

all it is is paint right

It's an enamel which has been baked into the glass. By sanding you're mainly smoothing the raised edge's of the frit in order to get the tint to stick without bubbles...

[NASKRON]

It's an enamel which has been baked into the glass. By sanding you're mainly smoothing the raised edge's of the frit in order to get the tint to stick without bubbles...

nice, will do