Rear Shims Universal Fit across all Delta's?

[dandaman15]

It shows in the picture a set-up with 5 lug and Im guessing its for a rear disc set-up. However, I have drums and will need these in the future. Will they work? Idk if the pattern they show for the hub is different for 4lug vs 5lug and/or drum vs. disc. Ill be needing something like this in the future, so any info will be appreciated.



http://www.racinglab.com/spc-camber-...rolet-006.html

[qwikredline]

not sure why you need this not a good thing to do shim the wheel bearing on a cobalt . calipers immediately bind. like wow

[dandaman15]

not sure why you need this not a good thing to do shim the wheel bearing on a cobalt . calipers immediately bind. like wow

I have drums in the rear so worry about calipers is not really relevant.

I just need to know if it fit, thats all I asked.


I want to run 235/40 on a 17x8 +20. The front I can fit fine but the rear will either need camber or rolling and pulling of the fenders. But from what I have heard they like to buckle easily so adding a little camber is another option. If it turns out the set up will only poke like 1/4 to 1/2in Ill try rolling them but if its more I may need another option.

[qwikredline]

the offset is wrong for a cobalt so dont get the wheels.
the spacers will space the entire drum assembly out so that will work but you wont gain much. the tire should fit easily without rolling the fenders with the correct wheel. save ur money get the right offset wheels in the first place. 38 -42 mm

[Maven]

I've had to shim for camber only before, i prefer to use standard metal alignment shims. Those plastic rings are a pita