+ Reply to Thread
Results 1 to 10 of 10

Thread: Need a new FR axle...

  1. #1

    Default Need a new FR axle...

    Has anyone ever tried out the ZZP Stage 1 axles?

    Or should I just buy the Napa ones?

    Some people are saying these are the same axles...

    I drive an 07 LSJ.
    07-LSJ

    Well ya know, for me, the action is the juice!

  2. #2
    LIFER
    rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06's Avatar
    Join Date
    Feb 2010
    Location
    Delaware
    Posts
    17,846

    Default

    not sure about ZZP's stage 1 axles but i heard that OTTP's were the same as Napa ones.

    i'd recommend just going with the Napa ones. i'm assuming you have the proper upgraded mounts to eliminate wheel hop.....?

  3. #3
    Post Master General
    BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS is a jewel in the rough BLAZIN07SS's Avatar
    Join Date
    Feb 2010
    Location
    Miami, FL
    Posts
    10,812

    Default

    buy the napa's with a lifetime warranty. it might come in handy later on. lol

    BULLSEYE POWER FANBOY #001

  4. #4

    Default

    Yeah, I have the Powell mounts.

    Is it OK to upgrade just my front right or do I need both right and left when getting the Napa axles.

    Also, I see the same part number for both axles....are they the same?
    Last edited by rallyracer; 12-15-2011 at 11:47 AM.
    07-LSJ

    Well ya know, for me, the action is the juice!

  5. #5
    LIFER
    rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06 rallycobalt06's Avatar
    Join Date
    Feb 2010
    Location
    Delaware
    Posts
    17,846

    Default

    axles are the same.

    i'd do both and get them out of the way, but if your money situation is a factor then just replace the one that's broken. when i had my LSJ and broke an axle, i went ahead and upgraded both of them and kept the one good stock axle as a "just incase spare".

  6. #6
    I know nothing! ac66bronco is an unknown quantity at this point ac66bronco's Avatar
    Join Date
    Apr 2010
    Location
    Columbus. OH
    Posts
    1,432

    Default

    Quote Originally Posted by rallycobalt06 View Post
    axles are the same.

    i'd do both and get them out of the way, but if your money situation is a factor then just replace the one that's broken. when i had my LSJ and broke an axle, i went ahead and upgraded both of them and kept the one good stock axle as a "just incase spare".
    Some ppl refer to axles as "fuses" cheaper and easier to replace than a transmition or a clutch lol
    Matty: The LNF MAF doesn't like extra air flowing past it and not being tuned for it.
    Me: I think dead horse is dead
    Matty: Nope, just saw the legs twitch a bit, must beat it more. not sure EVERYONE on this forum understands it just yet.
    Me:

  7. #7
    9psi Killer lol BlackBaltSw is an unknown quantity at this point BlackBaltSw is an unknown quantity at this point BlackBaltSw's Avatar
    Join Date
    Jun 2010
    Location
    Chicago
    Posts
    2,684

    Default

    Napa and ottp axles are the same thing, same stamped part number, regardless of what they say. ZZP said they use the same axles as well. Havent seen them personally tho. Napa sells the axles for 90 bucks. No core charge. Rebuilt axles are 60 + 60 core. Napa axles ftw. A little bit thicker then stock. maybe 1mm

    No Such Thing as a Fast Cobalt

  8. #8
    Post Master General
    USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP is a name known to all USMCFieldMP's Avatar
    Join Date
    Feb 2010
    Location
    Texarkana, AR
    Posts
    14,196

    Default

    It should be noted that 1mm thicker should provide a good amount more strength though.

    Is it wrong to be strong?
    - R 0 B 3 R T 0 - FükenDübben -

  9. #9

    Default

    I picked up the Napa axle yesterday...will be installing it tonight.
    07-LSJ

    Well ya know, for me, the action is the juice!

  10. #10
    NKOTB Empty Pockets is an unknown quantity at this point Empty Pockets's Avatar
    Join Date
    Jul 2010
    Location
    Rochester, New York
    Posts
    121

    Default

    Quote Originally Posted by USMCFieldMP View Post
    It should be noted that 1mm thicker should provide a good amount more strength though.

    Is it wrong to be strong?
    hahahaha that made me laugh so hard

    Winter Project: TVS, 1000's, ported head, clutch, wideband and interceptor

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts