Scythe's silver stoppers

[Deathscythe]

Well everyone, I've been given the opportunity to join the lnf crowd somewhat. I have a set of brembo calipers for the front, LNF rears for well... ... ... the rear, and some uprated and quite frankly sweet looking rotors. I've been giving rights to some serious stopping power.

Here are the Deathscythe Silver Stoppers.

Stoppers (Fronts on the outside, rears inside)








Vented fronts


rear rotors


vented rears


LNF rear caliper





brembos are the beautiful.


thanks John. Me thinks the sticker is on upside down





top down and bottom up.


Rotor caliper match for the rear



yeah.


Again, much thanks to Powell Race Shop for the package to lessen my car's handicap.

[rallycobalt06]

definitely looking forward to watching/assisting the install this weekend.

[Deathscythe]

I think it will be awesome. Andrew has a bit going on for his. And I'll be busy all day with mine. I'll be starting early.

[doogie_13]

Congrats on the sweetness. Old troll is old and forgets which way is up sometimes. He makes all things right in the end tho. lulz.

[rallycobalt06]

there'll be plenty of people there to help with both vehicles, even tho i'm sure Maven will prefer to work "alone" on Andrew's retrofits.

[doogie_13]

in the first pic, the rotor on the far left looks slightly, erm, 'previously enjoyed'. Or is that just my eyes forkin with me?

[Deathscythe]

Congrats on the sweetness. Old troll is old and forgets which way is up sometimes. He makes all things right in the end tho. lulz.

Trust me, not complaining at all. He was patient with me through all this. I wanted to do bronze, but the silver looks better. Good eyes on his part. I can deal with the sticker like that. Even though I've looked at them several times, I just noticed it.

in the first pic, the rotor on the far left looks slightly, erm, 'previously enjoyed'. Or is that just my eyes forkin with me?

A little surface rusting from slight previous use he told me about beforehand. There's no appreciable difference in surface lost to the eye. And I have no reason not to trust that.

[Deathscythe]

there'll be plenty of people there to help with both vehicles, even tho i'm sure Maven will prefer to work "alone" on Andrew's retrofits.

I have eight jackstands and a jack as well as a full toolset and a breaker bar. minus the fluid, I should have everything.

[Deathscythe]

I'll probably do my seats when it gets warmer. That can be done another time.

[qwikredline]

ask maven the brembo logo is always down

[rallycobalt06]

I have eight jackstands and a jack as well as a full toolset and a breaker bar. minus the fluid, I should have everything.

IF the weather ends up being way too cold, i can make my garage available.

[F_Imports_09tc]

Nice. I'll be seeing these in person this weekend

[F_Imports_09tc]

Need an impact? I have both cordless and corded. Set of impact sockets in 3/8 drive and 1/2" drive.

[Deathscythe]

I've broken the bolts a couple times before so I shouldn't. But I guess it wouldn't hurt.

[rallycobalt06]

brembos are the beautiful.

ask maven the brembo logo is always down

[F_Imports_09tc]

I'll pack them and if you need them they'll be there.

[Deathscythe]

ask maven the brembo logo is always down

The driver's side is. But from the way the way you describe it, and how the passenger side caliper should fit on, the emblem is going up.

[Steddy]

I forgot you had stock rotors



Er I mean vented

[Deathscythe]

I forgot you had stock rotors



Er I mean vented

not following.

you mean my lsj rotors?

[Steddy]

You have stock JL9 LNF rotors

I thought you had the big boy floaters